Dell PowerConnect 3524P User Manual page 233

Deleting an User Security Model Table Entry
1 Open the SNMPv3 User Security Model (USM) page.
2 Click Show All.
The User Security Model Table opens.
3 Select a User Security Model Table entry.
4 Check the Remove checkbox.
5 Click Apply Changes.
The User Security Model Table entry is deleted, and the device is updated.
Defining SNMPv3 Users Using CLI Commands
The following table summarizes the equivalent CLI commands for defining fields displayed in the
SNMPv3 User Security Model (USM) page.
Table 6-49. SNMPv3 User CLI Commands
CLI Command
snmp-server user username groupname
[remote engineid-string][auth-md5
password | auth-sha password | auth-
md5-key md5-des-key | auth-sha-key
sha-des-key]
show snmp users [username]
The following is an example of the CLI commands:
console (config)# snmp-server user John user-group auth-md5 1234
console (config)# end
console# show snmp users
Name
-------
John
Description
Configures a new SNMP V3 user.
Displays the configuration of users.
Group Name Auth Method
---------- -----------
user-group md5
Remote
------
Configuring System Information
233