Dell PowerConnect 3524P User Manual page 242

SNMPv1,2
SNMP versions 1 and 2 are enabled for the selected recipient. Define the following fields for SNMPv1
and SNMPv2:
• Community String (1-20 Characters) — Identifies the community string of the trap manager.
• Notification Version — Determines the trap type. The possible field values are:
– SNMP V1 — SNMP Version 1 traps are sent.
– SNMP V2 — SNMP Version 2 traps are sent.
SNMPv3
SNMPv3 is used to send and receive traps. Define the following fields for SNMPv3:
• User Name — The user to whom SNMP notifications are sent.
• Security Level — Defines the means by which the packet is authenticated. The possible field values
are:
– No Authentication — The packet is neither authenticated nor encrypted.
– Authentication — The packet is authenticated.
– Privacy — The packet is both authenticated and encrypted.
• UDP Port (1-65535) — The UDP port used to send notifications. The default is 162.
• Filter Name — Includes or excludes SNMP filters.
– Checked — Includes SNMP filters.
– Unchecked — Excludes SNMP filters.
• Timeout (1-300) — The amount of time (seconds) the device waits before resending informs.
The default is 15 seconds.
• Retries (1-255) — The amount of times the device resends an inform request.
The default is 3.
• Remove Notification Recipient — Removes selected notification recipients.
– Checked — Removes the specific notification recipient.
– Unchecked — Maintains the notification recipient.
When adding a Notification Recipient, the following additional parameters are available:
• Supported IP Format — Specifies the IP format supported by the recipient. The possible values are:
– IPv6 — IP version 6 is supported.
– IPv4 — IP version 4 is supported.
242
Configuring System Information