Gigabit Port Leds - Dell PowerConnect 3524P User Manual

The RJ-45 LED indications for PowerConnect 3524P and PowerConnect 3548P are described in the
following table:
Table 2-2. PowerConnect 3524P and PowerConnect 3548P RJ-45 Copper based 100BaseT LED Indications
LED Color
Speed/Link/Act Green Static
Green Flashing The ports is currently operating at 100 Mbps.
OFF
FDX Green Static
Green Flashing The port is operating at transitional mode. The PD is being detected, or is faulty.
Amber Static
Amber
Flashing
OFF

Gigabit Port LEDs

The following table describes the Gigabit (stacking port) LEDs:
Table 2-3. PowerConnect 3524 and PowerConnect 3548 RJ-45 Copper based 100BaseT LED Indications
LED
Link/Activity/Speed
FDX
32
Hardware Description
Description
The port is currently linked at 100 Mbps.
The port is currently operating at 10 Mbps or is not linked.
The Powered Device (PD) is detected and is operating at normal load. For more
information about Powered Devices, see "Managing Power over Ethernet".
For more information about Power over Ethernet, see "Managing Power over
Ethernet".
An overload or short has occurred on the Powered Device. For more information
about Power over Ethernet faults, see "Managing Power over Ethernet".
The powered device power conception exceeds the predefined power allotment.
For more information about Power over Ethernet power allotments, see
"Managing Power over Ethernet".
No powered device is detected.
Color Description
Green Static The port is running at 1000 Mbs.
Green Flashing The port is either transmitting or receiving data at 1000 Mbps.
Yellow Static The port is running at 10 or 100Mbs.
Yellow Flashing The port is either transmitting or receiving data at 10 or 100 Mbps.
OFF The port is currently not operating.
Green Static The port is currently operating in Full Duplex mode.
OFF The port is currently operating in Half Duplex mode.