3 In the Bind ACL to an Interface field, select a port or LAG.
4 Click Apply Changes.
The ACL is bound to the interface.
Displaying the ACL Bindings Table:
1 Open the Network Security - ACL Binding page.
2 Click Show All.
The ACL Bindings Table opens.
Figure 7-14. ACL Bindings Table
Copying ACL Parameters Between Interfaces
1 Open the Network Security - ACL Binding page.
2 Click Show All. The ACL Bindings Table opens.
3 In the Copy Parameters from field, select a Port or LAG from which you want to copy ACL settings.
4 In the table, check the Copy to checkbox for each entry to which you want to copy the settings.
5 Click Apply Changes.
Removing ACL Bindings
1 Open the Network Security - ACL Binding page.
2 Click Show All. The ACL Bindings Table opens.
3 In the table, check the Remove checkbox for each binding you want to remove.
4 Click Apply Changes.
Configuring Switch Information
287