Dell PowerConnect 3524P User Manual page 169

Figure 6-54. Optical Transceiver Diagnostics Table
In addition to the fields in the Optical Transceiver Diagnostics page, the Optical Transceiver Diagnostics
Table contains the following field:
• Unit No. — The unit number for which the cable is displayed.
• N/A — Not Available, N/S - Not Supported, W - Warning, E - Error
Performing Fiber Optic Cable Tests Using CLI Commands
The following table contains the CLI command for performing fiber optic cable tests.
Table 6-32. Fiber Optic Cable Test CLI Commands
CLI Command
show fiber-ports optical-
[
transceiver interface
[ ]
detailed
The following is an example of the CLI command:
Console# show fiber-ports optical-transceiver detailed
Port Temp Voltage
[C]
---- ---- ------
1/g1 48 5.15
1/g2 43 5.15
Description
Displays the optical transceiver
diagnostics.
]
Current Output
[Volt] [mA]
----- ------
50 1.789
10 1.789
Input POWER
[mWatt] TX
[mWatt]
------ ------
1.789 No
1.789 No
Configuring System Information
LOS
Fault
-----
No
No
169