Dell PowerConnect 3524P User Manual page 397

• VLAN ID — Specifies the VLAN ID.
• IGMP Snooping Status — Enables or disables IGMP snooping on the VLAN.
• Auto Learn — Enables or disables Auto Learn on the device.
• IGMP Querier Status — Enables or disables the IGMP Querier. The IGMP Querier simulates the
behavior of a multicast router, allowing snooping of the layer 2 multicast domain even though there is
no multicast router.
• Querier IP Address — IP address of the IGMP Querier. Use either use the VLAN's IP Interface address
or define a unique IP address which will be used as a source address of Querier.
• Host Timeout (1-2147483647) — Time before an IGMP snooping entry is aged out. The default time
is 260 seconds.
• Multicast Router Timeout (1-2147483647) — Time before aging out a Multicast router entry.
The default value is 300 seconds.
• Leave Timeout (0-2147483647) — Time, in seconds, after a port leave message is received before the
entry is aged out. User-defined enables a user-definable timeout period, and Immediate Leave
specifies an immediate timeout period. The default timeout is 10 seconds.
Enabling IGMP Snooping on the Device
1 Open the IGMP Snooping page.
2 Select the VLAN ID for the device on which IGMP snooping needs to be enabled.
3 Select Enable in the IGMP Snooping Status field.
4 Complete the fields on the page.
5 Click Apply Changes.
IGMP snooping is enabled on the device.
Displaying the IGMP Snooping Table
1 Open the IGMP Snooping.
2 Click Show All.
The IGMP Snooping Table opens.
Figure 7-75. IGMP Snooping Table
Configuring Switch Information
397