Defining Vlan Protocol Groups - Dell PowerConnect 3524P User Manual

Removing a MAC to VLAN Binding:
1 Open the Bind MAC to VLAN page.
2 Click Show All. The MAC to VLAN Table opens.
3 Select the desired VLAN, or select All to see bindings for all VLANs.
4 Select the Remove checkbox next to the desired bindings.
5 Click Apply Changes.
Binding MAC address to VLAN using CLI commands:
The following table summarizes the equivalent CLI commands for binding MAC addresses to VLAN.
Table 7-29. Binding MAC address to VLANs CLI Commands
CLI Command
mac-to-vlan mac-address vlan-id
switchport access vlan dynamic
show mac-to-vlan
no mac-to-vlan mac-address
The following is an example of the CLI commands:
console(config-vlan)# mac-to-vlan 0060.704c.73ff 123
console(config-vlan)# exit
console(config)# exit
console# show vlan mac-to-vlan
MAC Address VLAN
------------ ------
0060.704c.73ff 123

Defining VLAN Protocol Groups

The Protocol Group page provides parameters for configuring frame types to specific protocol groups.
To open the Protocol Group page, click Switch → VLAN → Protocol Group in the tree view.
364
Configuring Switch Information
Description
Binds the MAC address to the VLAN.
Configures private VLANs.
Displays the MAC to VLAN database
Unbinds the MAC address from the VLAN.