Dell PowerConnect 3524P User Manual page 307

3 Define the available fields for the relevant LAGs.
4 Click Apply Changes.
The LAG parameters are saved to the device.
Configuring LAGs with CLI Commands
The following table summarizes the equivalent CLI commands for configuring LAGs as displayed in the
Ports - LAG Configuration page.
Table 7-13. LAG Configuration CLI Commands
CLI Command
interface port-channel port-channel-
number
description string
shutdown
speed bps
negotiation [capability1
[capability2...capability5]
back-pressure
flowcontrol {auto | on | off }
show interfaces configuration
[ ethernet interface | port-channel
port-channel-number
]
show interfaces status
[
interface port-channel port-channel-
|
number
]
show interfaces description
ethernet interface port-channel
[ |
port-channel-number
]
show interfaces port-channel
channel-number
]
Description
Enters the interface configuration mode of a specific
port-channel.
Adds a description to an interface configuration.
Disables interfaces that are part of the currently set
context.
Configures the speed of a given ethernet interface when
not using auto negotiation.
Enables interface speed auto negotiation operation.
Enables Back Pressure on a given interface.
Configures the Flow Control on a given interface.
Displays the configuration for all configured interfaces.
ethernet Displays the status for all configured interfaces.
Displays the description for all configured interfaces.
port- Displays Port-channel information (which ports are
[
members of that port-channel, and whether they are
currently active or not).
Configuring Switch Information
307