Dell PowerConnect 3524P User Manual page 254

The Active Images page contains the following fields:
• Unit No. — The unit number for which the Image file is selected.
• Active Image — The Image file which is currently active on the unit.
• After Reset — The Image file which is active on the unit after the device is reset. The possible field
values are:
– Image 1 — Activates Image file 1 after the device is reset.
– Image 2 — Activates Image file 2 after the device is reset.
Selecting an Image File
1 Open the Active Images page.
2 Select an Image file for a specific unit in the After Reset field.
3 Click Apply Changes.
The Image file is selected. The Image file reloads only after the next reset. The currently selected
Image file continue to run until the next device reset.
Working with the Active Image File Using CLI Commands
The following table summarizes the equivalent CLI commands for viewing fields displayed in the Active
Images.
Table 6-55. File Upload CLI Commands
CLI Command
boot system [unit | unit ]
{image-1 | image-2}
show version [unit unit]
The following is an example of the CLI commands:
Console# boot system image-1
254
Configuring System Information
Description
Indicates the system image that the device loads
at startup.
Displays version information for the system