Configuring Advanced Settings
Use Advanced Settings to set miscellaneous global attributes of the switch. The changes to these
attributes are applied only after the switch is reset.
Click a link below to access on-line help for the indicated screen.
Click System → Advanced Settings in the tree view to open the Advanced Settings page.
The the Advanced Settings page contains a link for configuring general settings.
This section contians the following topics:
•
"Configuring General Settings" on page 259
Configuring General Settings
The General Settings page provides information for defining general device parameters.
To open the General Settings page, click System
Figure 6-111. General Settings
The General Settings page contains the following information:
•
Attribute — The general setting attribute.
•
Current — The currently configured value.
•
After Reset — The future (after reset) value. By entering a value in the After Reset column, memory is
allocated to the field table.
•
Max RAM Log Entries (20-400) — The maximum number of RAM Log entries. When the Log
entries are full, the log is cleared and the Log file is restarted.
•
Stacking Ports — The type of stacking ports: copper or fiber ports.
→
→
Advanced Settings
Configuring System Information
General Settings in the tree view.
259