The Voice VLAN Port Setting Table includes the Membership field which indicates if the Voice VLAN
member is a static or dynamic member. The field value Dynamic indicates the VLAN membership was
dynamically created through GARP . The field value Static indicates the VLAN membership is user-defined.
3 Select the unit number.
4 Modify the fields as desired.
5 Click Apply Changes.
Defining Voice VLAN Port Settings Using CLI Commands
The following table summarizes the equivalent CLI command for defining Voice VLAN port settings .
Voice VLAN Port Settings
Table 7-34.
CLI Command
voice vlan secure
no voice vlan secure
Defining OUIs
The Voice VLAN OUI page lists the Organizationally Unique Identifiers (OUIs) associated with the
Voice VLAN. The first three bytes of the MAC Address contain a manufacturer identifier. While the last
three bytes contain a unique station ID. Using the OUI, network managers can add specific
manufacturer's MAC addresses to the OUI table. Once the OUIs are added, all traffic received on the
Voice VLAN ports from the specific IP phone with a listed OUI, is forwarded on the voice VLAN.
To open the Voice VLAN OUI page, click Switch→ Voice VLAN → OUI in the tree view.
CLI Commands
Description
Use the voice vlan secure interface configuration command to configure the secure mode
for the voice VLAN. Use the no form of this command to disable the secure mode.
Configuring Switch Information
379