Dell PowerConnect 3524P User Manual page 391

The following table contains the IGMP port and LAG members management settings:
Table 7-39. IGMP Port/LAG Members Table Control Settings
Port Control Definition
D The port/LAG has joined the Multicast group dynamically in the Current Row.
S Attaches the port to the Multicast group as static member in the Static Row.
The port/LAG has joined the Multicast group statically in the Current Row.
F Forbidden.
Blank The port is not attached to a Multicast group.
Adding Bridge Multicast Addresses
1 Open the Bridge Multicast Group page.
2 Click Add.
The Add Bridge Multicast Group page opens.
Figure 7-72. Add Bridge Multicast Group
3 Define the VLAN ID and New Bridge Multicast Address fields.
4 Toggle a port to S to join the port to the selected Multicast group.
5 Toggle a port to F to forbid adding specific Multicast addresses to a specific port.
6 Click Apply Changes.
The bridge Multicast address is assigned to the Multicast group, and the device is updated.
Configuring Switch Information
391