Defining Vlan Protocol Groups; Protocol Group - Dell PowerConnect 5316M User Manual

Defining VLAN Protocol Groups

The Protocol Group page provides parameters for configuring frame types to specific protocol
groups. To open the Protocol Group page, click Switch→ VLAN→ Protocol Group in the tree
view.
NOTE:
Mapping to a non-configured VLAN is possible.
Figure 7-100. Protocol Group
Frame Type — The packet type. Possible field values are Ethernet, RFC1042, and LLC Other.
Protocol Value — User-defined protocol name.
Ethernet-Based Protocol Value — The Ethernet protocol group type. The possible field values are
IP, IPX and IPV6.
Protocol Group ID — ID number assigned to frames containing specified protocol value.
Remove — When selected, removes frame-to-protocol group mapping, if the protocol port to be
removed is not configured on this protocol group.
Adding a Protocol Group
1
Open the Protocol Group page.
2
Click Add.
The Add Protocol to Group page opens.
3
Complete the fields on the page.
Configuring Switch Module Information
231