Defining Vlan Protocol Groups - Dell PowerConnect 6024 User Manual

The following is an example of the CLI commands:
Console (config-if)# switchport mode access
Console (config-if)# switchport trunk native vlan 123
Console (config-if)# switchport general pvid 234
Console (config-if)# switchport general allowed vlan add 1,2,5,6
tagged
Console (config-if)# switchport general acceptable-frame-type
tagged-only

Defining VLAN Protocol Groups

The Protocol Group page contains information regarding protocol names and the VLAN Ethernet
type. Interfaces can be classified as a specific protocol based interface. The classification places the
interface into a protocol group.To open the Protocol Group page, click Switch→ VLAN→ Protocol
Group in the tree view.
Figure 7-31. Protocol Group Table
Frame Type — The packet type. Possible field values are Ethernet, RFC1042, and LLC Other.
Protocol Value — User-defined protocol name.
Ethernet-Based Protocol Value — The Ethernet protocol group type.
Protocol Group ID — The VLAN Group ID number.
305
Configuring Switch Information