Download  Print this page

Adjusting The Screen; Adjusting The Brightness Of The Screen Display; Touch Panel Is Malfunctioning - Brother Quattro 2 6700D Operation Manual

Embroidery and sewing machine.
Hide thumbs

Advertisement

Table of Contents

ADJUSTING THE SCREEN

ADJUSTING THE SCREEN
Adjusting the Brightness of the
Screen Display
If the screen is not looks very clear under certain
situation, you can adjust the brightness of the
screen display.
a
Press
→ The Sewing settings screen appears.
b
Press
→ The General settings screen appears.
c
Display 4/8 (page 4 of 8) of the General
settings screen.
d
Press
or
the screen display.
*
The screen appears dim as the number on the
settings screen decreases. The screen appears
brighter as the number increases.

Touch Panel is Malfunctioning

If the screen does not respond correctly when you
touch a key (the machine does not perform the
operation or performs a different operation), follow
the steps below to make the proper adjustments.
342
.
.
to adjust the brightness of
a
Holding your finger on the screen, turn the
main power switch to OFF and back to ON.
→ The touch panel adjustment screen is displayed.
b
Using the included touch pen, lightly touch
the center of each +, in order from 1 to 5.
Note
• Only use the included touch pen to touch the
screen. Do not use a mechanical pencil, pin,
or other sharp object. Do not press too hard
on the screen. Otherwise, damage may
result.
+1
+2
c
Turn the main power to OFF, then turn it
back to ON.
Note
• If you finish the screen adjustment and the
screen still does not respond, or if you
cannot do the adjustment, contact your
authorized dealer.
+4
+5
+3

Advertisement

Table of Contents

Troubleshooting

   Related Manuals for Brother Quattro 2 6700D

This manual is also suitable for:

Nv6700d

Comments to this Manuals

Symbols: 0
Latest comments:
  • handyman0031 Jan 03, 2015 10:26:
    please provide a part number for the zigzag embroidery plate,it's included with the 6700 D, however no part number is referenced anywhere in the stupid manual, and there is no item anywhere to replace it? After spending 10 K you think you could put a part number in a book so I can reorder one? my machine jammed and this one has a huge bur on it that cannot be worked out :-(