Download  Print this page

Stitch Setting Chart - Brother Quattro 2 6700D Operation Manual

Embroidery and sewing machine.
Hide thumbs

Advertisement

Table of Contents

STITCH SETTING CHART

The following chart shows information for each utility stitch concerning applications, stitch lengths, stitch
widths, and whether or not the twin needle mode can be used.
Note
• Quilting foot "C" is used when the straight stitch needle plate is attached to the machine. Refer to
"Using Free motion Quilting Foot "C"" on page 116.
Presser foot
Stitch
Stitch name
Straight stitch
(Left)
Straight stitch
(Left)
Straight stitch
(Middle)
Straight stitch
(Middle)
Triple stretch
stitch
Stem stitch
Decorative
stitch
Basting stitch
Zigzag stitch
Zigzag stitch
Zigzag stitch
(right)
Zigzag stitch
(left)
2 steps elastic
zigzag
Applications
General sewing, gather,
pintuck, etc. Reverse stitch is
sewn while pressing "Reverse/
Reinforcement Stitch" button.
General sewing, gather,
pintuck, etc. Reinforcement
stitch is sewn while pressing
"Reverse/Reinforcement
Stitch" button.
General sewing, gather,
pintuck, etc. Reverse stitch is
sewn while pressing "Reverse/
Reinforcement Stitch" button.
General sewing, gather,
pintuck, etc. Reinforcement
stitch is sewn while pressing
"Reverse/Reinforcement
Stitch" button.
General sewing for
reinforcement and decorative
topstitching
Reinforced stitching, sewing
and decorative applications
Decorative stitching, top
stitching
Basting
For overcasting, mending.
Reverse stitch is sewn while
pressing "Reverse/
Reinforcement Stitch" button.
For overcasting, mending.
Reinforcement stitch is sewn
while pressing "Reverse/
Reinforcement Stitch" button.
Start from right needle
position, zigzag sew at left.
Start from left needle position,
zigzag sew at right.
Overcasting (medium weight
and stretch fabrics), tape and
elastic
STITCH SETTING CHART
Stitch width
Stitch length
[mm (inch)]
[mm (inch)]
Auto.
Manual
Auto.
0.0
0.0 - 7.0
2.5
(0)
(0 - 1/4)
(3/32)
0.0
0.0 - 7.0
2.5
(0)
(0 - 1/4)
(3/32)
3.5
0.0 - 7.0
2.5
(1/8)
(0 - 1/4)
(3/32)
3.5
0.0 - 7.0
2.5
(1/8)
(0 - 1/4)
(3/32)
0.0
0.0 - 7.0
2.5
(0)
(0 - 1/4)
(3/32)
1.0
1.0 - 3.0
2.5
(1/16)
(1/16 - 1/8)
(3/32)
0.0
0.0 - 7.0
2.5
(0)
(0 - 1/4)
(3/32)
0.0
0.0 - 7.0
20
(0)
(0 - 1/4)
(3/4)
3.5
0.0 - 7.0
1.4
(1/8)
(0 - 1/4)
(1/16)
3.5
0.0 - 7.0
1.4
(1/8)
(0 - 1/4)
(1/16)
3.5
2.5 - 5.0
1.4
(1/8)
(3/32 - 3/16)
(1/16)
3.5
2.5 - 5.0
1.4
(1/8)
(3/32 - 3/16)
(1/16)
5.0
1.5 - 7.0
1.0
(3/16)
(1/16 - 1/4)
(1/16)
Twin
needle
Manual
0.2 - 5.0
OK
(1/64 - 3/16)
( J )
0.2 - 5.0
OK
(1/64 - 3/16)
( J )
0.2 - 5.0
OK
(1/64 - 3/16)
( J )
0.2 - 5.0
OK
(1/64 - 3/16)
( J )
1.5 - 4.0
OK
(1/16 - 3/16)
( J )
1.0 - 4.0
OK
(1/16 - 3/16)
( J )
1.0 - 4.0
OK
(1/16 - 3/16)
( J )
5 - 30
(3/16 - 1-3/
NO
16)
0.0 - 4.0
OK
(0 - 3/16)
( J )
0.0 - 4.0
OK
(0 - 3/16)
( J )
0.3 - 4.0
OK
(1/64 - 3/16)
( J )
0.3 - 4.0
OK
(1/64 - 3/16)
( J )
0.2 - 4.0
OK
(1/64 - 1/16)
( J )
359

Advertisement

Table of Contents

Troubleshooting

   Related Manuals for Brother Quattro 2 6700D

This manual is also suitable for:

Nv6700d

Comments to this Manuals

Symbols: 0
Latest comments:
  • handyman0031 Jan 03, 2015 10:26:
    please provide a part number for the zigzag embroidery plate,it's included with the 6700 D, however no part number is referenced anywhere in the stupid manual, and there is no item anywhere to replace it? After spending 10 K you think you could put a part number in a book so I can reorder one? my machine jammed and this one has a huge bur on it that cannot be worked out :-(