VARIOUS EMBROIDERING FUNCTIONS
to select the appliqué setting.
to the center. After selecting the appliqué
setting, move the pattern to the desired
• To cancel the setting, press
• If no pattern is selected, the key appears
gray and cannot be selected.
→ The steps for creating the appliqué piece are added
to the sewing order.
is pressed, the pattern is moved
• Three steps are added to the sewing order:
appliqué cutting line, position of pattern
placement on the garment, and appliqué
a Cutting line for appliqué
b Position of pattern placement on garment
c Appliqué stitching
• An appliqué piece cannot be created if the
pattern is too large or too complicated or a
combined pattern is separated. Even if the
selected pattern fits within the embroidering
area, the entire appliqué pattern may
exceed the embroidering area when the out-
line is added. If an error message appears,
select a different pattern or edit it.
Fuse or stick a piece of stabilizer to the
back of the felt or denim fabric to be used
as the appliqué piece.
• For best results, be sure to use stabilizer
material for embroidering.