Download  Print this page

If The Thread Breaks During Sewing - Brother Quattro 2 6700D Operation Manual

Embroidery and sewing machine.
Hide thumbs

Advertisement

Table of Contents
ADJUSTMENTS DURING THE EMBROIDERY PROCESS
If the Thread Breaks During
Sewing
a
Press the "Start/Stop" button to stop the
machine.
b
If the upper thread is broken, redo the
upper threading. If the bobbin thread is
broken, press
directions in steps
previous section to reset the bobbin.
c
Press
.
d
Press the "Presser Foot Lifter" button to
lower the presser foot.
e
Press
→ The camera view window appears.
230
and follow the
a
e
through
from the
f
Press
,
, or
needle back the correct number of stitches
before the spot where the thread broke.
*
If you cannot move back to the spot where the
thread broke, press
move to the beginning position of that color, then
use
,
, or
slightly before where the thread broke.
*
Press
to enlarge the image in the screen.
*
Press
to remove "
g
Press
to close the camera view
window.
h
Press
to return to the original screen.
i
Press the "Presser Foot Lifter" button to
lower the presser foot, and press the "Start/
Stop" button to continue sewing.
to move the
to select the color and
to move ahead to
" from the screen.

Advertisement

Table of Contents

Troubleshooting

   Related Manuals for Brother Quattro 2 6700D

This manual is also suitable for:

Nv6700d

Comments to this Manuals

Symbols: 0
Latest comments:
  • handyman0031 Jan 03, 2015 10:26:
    please provide a part number for the zigzag embroidery plate,it's included with the 6700 D, however no part number is referenced anywhere in the stupid manual, and there is no item anywhere to replace it? After spending 10 K you think you could put a part number in a book so I can reorder one? my machine jammed and this one has a huge bur on it that cannot be worked out :-(