Download  Print this page

Brother Quattro 2 6700D Operation Manual Page 224

Embroidery and sewing machine.
Hide thumbs

Advertisement

Table of Contents
SEWING AN EMBROIDERY PATTERN
f
Apply a thin layer of adhesive or spray
adhesive to the back of the appliqué piece
and attach it to the appliqué position so that
it follows the seam of the outline.
Memo
• If the appliqué material is a lightweight
fabric, you may want to use a fusible web on
the back to stabilize the fabric and for
appliqué placement. Fuse appliqué in place
with an iron.
Do not remove fabric from the frame to iron
the appliqué material.
g
Press the "Start/Stop" button.
Memo
• Some patterns may not show all three appli-
qué steps. Sometimes the "APPLIQUE" step
will be shown as a color.
→ The appliqué will then be completed.
h
Change the upper thread and then carry out
the rest of the embroidering.
Memo
• Some glue may get onto the presser foot,
needle, and needle plate at this time. Finish
embroidering the appliqué pattern and then
clean away the glue.
• For best sewing results clip all threads
between color steps.
222

Advertisement

Table of Contents

Troubleshooting

   Related Manuals for Brother Quattro 2 6700D

This manual is also suitable for:

Nv6700d

Comments to this Manuals

Symbols: 0
Latest comments:
  • handyman0031 Jan 03, 2015 10:26:
    please provide a part number for the zigzag embroidery plate,it's included with the 6700 D, however no part number is referenced anywhere in the stupid manual, and there is no item anywhere to replace it? After spending 10 K you think you could put a part number in a book so I can reorder one? my machine jammed and this one has a huge bur on it that cannot be worked out :-(