Download  Print this page

Using Stored Custom Stitches; Storing Custom Stitches In Your List; If The Memory Is Full - Brother Quattro 2 6700D Operation Manual

Embroidery and sewing machine.
Hide thumbs

Advertisement

Table of Contents

USING STORED CUSTOM STITCHES

USING STORED CUSTOM STITCHES
Storing Custom Stitches in Your
List
Stitch patterns created using the MY CUSTOM
STITCH function can be stored for later use. Once
you finish entering the stitch data, press
The "Saving" message appears and the stitch will
be stored.
Before storing a stitch, press
run of the stitch.
Memo
• Storing a stitch pattern takes a few seconds.
• For details on retrieving a stored stitch pat-
tern, see page 335.
Note
• Do not turn off the machine while the "Sav-
ing" message is displayed, otherwise the
stitch pattern data being saved may be lost.
334

■ If the Memory is Full

If the following message appears after
pressed, the stitch pattern cannot be stored because
either the machine's memory is full or the stitch
pattern being stored is larger than the amount of
space available in the memory. To be able to store
the stitch pattern in the machine's memory, a
.
previously stored stitch pattern must be deleted.
to sew a test-
Note
• To save custom stitches to USB media or in
the computer, follow the previously
described procedure to store the custom
stitch, and then press
stitch (see the following "Retrieving Stored
Stitches" section). Press
stitch to USB media or in the computer. (For
details, "Saving Stitch Patterns to USB
Media" on page 178 or "Saving Stitch
Patterns in the Computer" on page 179.)
is
to select the
to save the

Advertisement

Table of Contents

Troubleshooting

   Related Manuals for Brother Quattro 2 6700D

This manual is also suitable for:

Nv6700d

Comments to this Manuals

Symbols: 0
Latest comments:
  • handyman0031 Jan 03, 2015 10:26:
    please provide a part number for the zigzag embroidery plate,it's included with the 6700 D, however no part number is referenced anywhere in the stupid manual, and there is no item anywhere to replace it? After spending 10 K you think you could put a part number in a book so I can reorder one? my machine jammed and this one has a huge bur on it that cannot be worked out :-(