Download  Print this page

Brother Quattro 2 6700D Operation Manual Page 139

Embroidery and sewing machine.
Hide thumbs

Advertisement

Table of Contents
b
Attach monogramming foot "N", and select
stitch
to sew the left side of the
buttonhole.
c
Press the "Start/Stop" button to start
sewing.
d
Sew the desired length for the buttonhole
and press the "Start/Stop" button again.
e
Select stitch
press the "Start/Stop" button.
→ The machine will automatically stop after sewing
the bar tack.
to sew the bar tack and
f
Select stitch
the buttonhole, and press the "Start/Stop"
button to begin sewing.
g
Sew the right side of the buttonhole and
press the "Start/Stop" button again.
*
Sew the right side of the buttonhole the same length
as the left.
h
Select stitch
then press the "Start/Stop" button.
→ The machine will automatically sew off the bar tack
tie and stop when the bar tack is complete.
i
Raise the presser foot and remove the
fabric.
j
Refer to page 134 to open the buttonhole.
SEWING THE STITCHES
to sew the right side of
to sew the bar tack and
3
137

Advertisement

Table of Contents

Troubleshooting

   Related Manuals for Brother Quattro 2 6700D

This manual is also suitable for:

Nv6700d

Comments to this Manuals

Symbols: 0
Latest comments:
  • handyman0031 Jan 03, 2015 10:26:
    please provide a part number for the zigzag embroidery plate,it's included with the 6700 D, however no part number is referenced anywhere in the stupid manual, and there is no item anywhere to replace it? After spending 10 K you think you could put a part number in a book so I can reorder one? my machine jammed and this one has a huge bur on it that cannot be worked out :-(