Download  Print this page

Using The Flat Bed Attachment; Using The Accessory Case - Brother Quattro 2 6700D Operation Manual

Embroidery and sewing machine.
Hide thumbs



Using the Flat Bed Attachment

Pull the top of the flat bed attachment to open the
accessory compartment.

Using the Accessory Case

■ Opening the Accessory Case
Fully slide the bar on each side of the accessory
case, and then lift off the lid to open the case.
The case can only be opened or locked correctly if
both bars are slid in the same direction.
a Bars
■ Closing the Accessory Case
Fully slide the bar on each side of the
accessory case lid to align the notches in
the lid with the notches in the bars.
Place the lid on top of the case so that the
notches in the lid align with the tabs on the
case, and then slide the bar on each side
back to the center of the accessory case.
a Bars
■ Using the Accessory Trays
Two presser foot storage trays are stored in the
included accessory case. One is for presser feet for
utility sewing, and the other is for presser feet for
embroidery and machine quilting.
a For presser feet for utility sewing
b For presser feet for embroidery and machine
For your convenience, a presser foot storage tray
can be stored in the accessory compartment of the
flat bed attachment.


Table of Contents


   Related Manuals for Brother Quattro 2 6700D

This manual is also suitable for:


Comments to this Manuals

Symbols: 0
Latest comments:
  • handyman0031 Jan 03, 2015 10:26:
    please provide a part number for the zigzag embroidery plate,it's included with the 6700 D, however no part number is referenced anywhere in the stupid manual, and there is no item anywhere to replace it? After spending 10 K you think you could put a part number in a book so I can reorder one? my machine jammed and this one has a huge bur on it that cannot be worked out :-(