Download  Print this page

Lower Threading; Winding The Bobbin; Using The Supplemental Spool Pin - Brother Quattro 2 6700D Operation Manual

Embroidery and sewing machine.
Hide thumbs




Winding the Bobbin

video example of bobbin winding on the LCD (see
page 46). Follow the steps explained below to
complete the operation.
• The included bobbin was designed specifically
for this sewing machine. If bobbins from other
models are used, the machine will not operate
correctly. Use only the included bobbin or
bobbins of the same type (part code: SA156,
(SFB: XA5539-151)).
Actual size
a This model
b Other models
c 11.5 mm (approx. 7/16 inch)
in this order to display a

■ Using the Supplemental Spool Pin

With this machine, you can wind the bobbin during
sewing. While using the main spool pin to sew
embroidery, you can conveniently wind the bobbin
using the supplemental spool pin.
a Supplemental spool pin
Turn the main power to ON and open the
top cover.
Align the groove in the bobbin with the
spring on the bobbin winder shaft, and set
the bobbin on the shaft.
a Groove in the bobbin
b Spring on the shaft


Table of Contents


   Related Manuals for Brother Quattro 2 6700D

This manual is also suitable for:


Comments to this Manuals

Symbols: 0
Latest comments:
  • handyman0031 Jan 03, 2015 10:26:
    please provide a part number for the zigzag embroidery plate,it's included with the 6700 D, however no part number is referenced anywhere in the stupid manual, and there is no item anywhere to replace it? After spending 10 K you think you could put a part number in a book so I can reorder one? my machine jammed and this one has a huge bur on it that cannot be worked out :-(