Brother Quattro 2 6700D Operation Manual page 64

UPPER THREADING
h
Continue threading however do not pass
the thread in the needle bar thread guide
"6" on the needle bar. Thread the needle on
the right side.
a Needle bar thread guide
i
Press
j
Select a stitch pattern. (Example:
* Refer to the "STITCH SETTING CHART" at the end
of this manual for the proper stitch to use with
presser foot "J".
→ The selected stitch is displayed.
Note
• If the
the stitch, the selected stitch cannot be
sewn in the twin needle mode.
k
Press to select the twin needle mode.
a
a Single needle/twin needle setting
→
appears.
62
.
key is light gray after selecting
• Be sure to set the twin needle mode when
using the twin needle. Using the twin needle
while the machine is in single needle mode
could cause the needle to break, resulting in
damage.
l
Start sewing.
Sample of Twin Needle Sewing
)
Memo
• To change direction when sewing with the
twin needle, raise the needle from the fabric,
raise the presser foot lever, and then turn
the fabric.
CAUTION