Download  Print this page

Brother Quattro 2 6700D Operation Manual Page 321

Embroidery and sewing machine.
Hide thumbs

Advertisement

CAUTION
• When sewing bobbin work, be sure to select an
embroidery pattern for bobbin work. If any other
type of pattern is selected, the machine may be
damaged.
Note
• Embroidery sewing speed defaults to 350
spm when a bobbin work embroidery pattern
is selected. The Settings screen will not
allow speed to be adjusted.
Memo
• When an embroidery pattern for bobbin work
is selected, the automatic thread cutting
function is turned off. Afterward, if a pattern
other than one for bobbin work is selected,
the automatic thread cutting function is
returned to the setting that was selected
before the embroidery pattern for bobbin
work was chosen.
i
Press
.
→ The sewing screen is displayed.
CREATING BOBBIN WORK (EMBROIDERY)
Note
• Since bobbin work is sewn from the wrong
side of the fabric, the pattern shown in the
screen appears as a mirror image of the
final sewn embroidery. If necessary, flip the
image to preview it. In addition, when
sewing with the thread colors shown in the
sewing screen, select a bobbin thread that
matches what is shown in the screen.
a Image shown in screen
Memo
• With embroidery patterns for bobbin work,
the size and thread density cannot be
changed. In addition, the automatic thread
cutting function cannot be turned on.
j
Press
, and then adjust the tension of
the upper thread.
For details on adjusting the tension of the upper
thread, refer to "Adjusting Thread Tension" on
page 233.
Memo
• We recommend a setting between 6 and 8
for the upper thread tension.
b Sewn embroidery
(Right side of fabric)
7
319

Advertisement

Table of Contents

Troubleshooting

   Related Manuals for Brother Quattro 2 6700D

This manual is also suitable for:

Nv6700d

Comments to this Manuals

Symbols: 0
Latest comments:
  • handyman0031 Jan 03, 2015 10:26:
    please provide a part number for the zigzag embroidery plate,it's included with the 6700 D, however no part number is referenced anywhere in the stupid manual, and there is no item anywhere to replace it? After spending 10 K you think you could put a part number in a book so I can reorder one? my machine jammed and this one has a huge bur on it that cannot be worked out :-(