Adjusting The Screen; Adjusting The Brightness Of The Screen Display; Touch Panel Is Malfunctioning - Brother 882-W07 Operational Manual

ADJUSTING THE SCREEN

ADJUSTING THE SCREEN

Adjusting the Brightness of the
Screen Display
If the screen is not looks very clear under certain
situation, you can adjust the brightness of the
screen display.
a
Press
→ The Sewing settings screen appears.
b
Press
→ The General settings screen appears.
c
Display 4/8 (page 4 of 8) of the General
settings screen.
d
Press or
the screen display.
* The screen appears dim as the number on the
settings screen decreases. The screen appears
brighter as the number increases.

Touch Panel is Malfunctioning

If the screen does not respond correctly when you
touch a key (the machine does not perform the
operation or performs a different operation), follow
the steps below to make the proper adjustments.
342
.
.
to adjust the brightness of
a
Holding your finger on the screen, turn the
main power switch to OFF and back to ON.
→ The touch panel adjustment screen is displayed.
b
Using the included touch pen, lightly touch
the center of each +, in order from 1 to 5.
Note
• Only use the included touch pen to touch the
screen. Do not use a mechanical pencil, pin,
or other sharp object. Do not press too hard
on the screen. Otherwise, damage may
result.
+1
+2
c
Turn the main power to OFF, then turn it
back to ON.
Note
• If you finish the screen adjustment and the
screen still does not respond, or if you
cannot do the adjustment, contact your
authorized dealer.
+4
+5
+3