Eyelet - Brother Quattro 2 6700D Operation Manual

SEWING THE STITCHES

Eyelet

Use this stitch for making belt holes and other similar applications.
Stitch Stitch name

Eyelet

Star eyelet
a
Select or
b
Use
display or the stitch length display to
choose the size of the eyelet.
* Actual size
a Large 7 mm (approx. 1/4 inch)
b Medium 6 mm (approx. 15/64 inch)
c Small 5 mm (approx. 3/16 inch)
Note
• Only one size is available for
c
Attach monogramming foot "N", then
rotate the handwheel toward you
(counterclockwise) to check the needle
drop position.
a Needle drop position
144
Presser
Applications
foot
For making eyelets, holes on
belts, etc.
For making star-shaped eyelets
on holes.
.
in either the stitch width
.
Stitch width
[mm (inch)]
Auto Manual
7.0 7.0 6.0 5.0
(1/4) (1/4 15/64 3/16)
— —
d
Lower the presser foot and start sewing.
→ When sewing is finished, the machine sews
reinforcement stitches and stops automatically.
Note
• If the stitch pattern comes out poorly, make
adjustments to "SEWING STITCH
PATTERNS" on page 161.
e
Use the eyelet punch to make a hole in the
center of the stitching.
Stitch length
Twin
[mm (inch)]
needle
Auto Manual
7.0 7.0 6.0 5.0
NO
(1/4) (1/4 15/64 3/16)
— — NO