Download  Print this page

Overcasting; Overcasting Using Presser Foot "g - Brother Quattro 2 6700D Operation Manual

Embroidery and sewing machine.
Hide thumbs

Advertisement

Overcasting

Use for the edge of seams in skirts or trousers, and the edge of all cuttings. Use presser foot "G", presser
foot "J", or the side cutter attachment depending on the kind of overcasting stitch you select.

■ Overcasting Using Presser Foot "G"

Stitch
Stitch name
Overcasting stitch
Overcasting stitch
Overcasting stitch
a
Select a stitch and attach presser foot "G".
b
Lower the presser foot so that the presser
foot guide is set flush against the edge of the
fabric.
Presser
Applications
foot
Reinforcing of light and medium
weight fabrics
Reinforcing of heavyweight
fabric
Reinforcing of medium,
heavyweight and easily friable
fabrics or decorative stitching.
Stitch width
[mm (inch)]
Auto
Manual
3.5
2.5 - 5.0
(1/8)
(3/32 - 3/16)
5.0
2.5 - 5.0
(3/16)
(3/32 - 3/16)
5.0
3.5 - 5.0
(3/16)
(1/8 - 3/16)
c
Sew along the presser foot guide.
a Guide
CAUTION
• After the stitch width is adjusted, rotate the
handwheel toward you (counterclockwise).
Check that the needle does not touch the
presser foot. If the needle hits the presser foot,
the needle may break and cause injury.
a The needle should not touch the center bar
• If the presser foot is raised to its highest level,
the needle may strike the presser foot.
SEWING THE STITCHES
Stitch length
Twin
[mm (inch)]
needle
Auto
Manual
2.0
1.0 - 4.0
NO
(1/16)
(1/16 - 3/16)
2.5
1.0 - 4.0
NO
(3/32)
(1/16 - 3/16)
2.5
1.0 - 4.0
NO
(3/32)
(1/16 - 3/16)
3
105

Advertisement

Table of Contents

Troubleshooting

   Related Manuals for Brother Quattro 2 6700D

This manual is also suitable for:

Nv6700d

Comments to this Manuals

Symbols: 0
Latest comments:
  • handyman0031 Jan 03, 2015 10:26:
    please provide a part number for the zigzag embroidery plate,it's included with the 6700 D, however no part number is referenced anywhere in the stupid manual, and there is no item anywhere to replace it? After spending 10 K you think you could put a part number in a book so I can reorder one? my machine jammed and this one has a huge bur on it that cannot be worked out :-(