Multi-Directional Sewing (Straight Stitch And Zigzag Stitch) - Brother Quattro 2 6700D Operation Manual

Multi-directional Sewing
(Straight Stitch and Zigzag Stitch)
Use these stitch patterns to attach patches or
emblems to pant legs, shirt sleeves, etc.
a
Remove the flat bed attachment to use the
free-arm.
Memo
• Insert the tubular piece of fabric onto the
free-arm, and then sew in the order shown in
the illustration.
b
Select and attach monogramming foot
"N".
Memo
• For details on each stitch, refer to the
"STITCH SETTING CHART" at the end of
this manual.
c
Set the needle in the fabric at the sewing
start point, and sew seam "1" as shown.
a Start Point
d
Select and sew seam "2" as shown.
* The fabric will move sideways, guide the fabric by
hand to keep sewing straight.
e
Select and sew seam "3" as shown.
→ The fabric feeds forward while stitching backward.
f
Select and sew seam "4" as shown.
→ The seam will be connected to the starting point of
seam 1.
SEWING THE STITCHES
3
145