Download  Print this page

Upgrading Your Machine's Software; Upgrade Procedure Using Usb Media - Brother Quattro 2 6700D Operation Manual

Embroidery and sewing machine.
Hide thumbs

Advertisement

UPGRADING YOUR MACHINE'S SOFTWARE

You can use USB media or a computer to upgrade software for your sewing machine.
When an upgrade program is available on " http://solutions.brother.com ", please download the files
following the instructions on the website and steps below.
Note
• When using USB media to upgrade the software, check that no data other than the upgrade file is
saved on the USB media being used before starting to upgrade.
Upgrade Procedure Using USB
Media
a
While pressing the "Automatic Threading"
button, turn the main power to ON.
→ The following screen will appear on the LCD.
b
Press
.
c
Insert the USB media into the primary (top)
USB port on the machine. The media device
should only contain the upgrade file.
a Primary (top) USB port for media
b USB media
UPGRADING YOUR MACHINE'S SOFTWARE
Note
• The access lamp will begin blinking after
inserting USB media, and it will take about 5
to 6 seconds to recognize the media. (Time
will differ depending on the USB media).
d
Press
.
→ The upgrade file is loaded.
Note
• If an error occurs, a red text error message
will appear. When the installation is
performed successfully, following message
will appear.
9
357

Advertisement

Table of Contents

Troubleshooting

   Related Manuals for Brother Quattro 2 6700D

This manual is also suitable for:

Nv6700d

Comments to this Manuals

Symbols: 0
Latest comments:
  • handyman0031 Jan 03, 2015 10:26:
    please provide a part number for the zigzag embroidery plate,it's included with the 6700 D, however no part number is referenced anywhere in the stupid manual, and there is no item anywhere to replace it? After spending 10 K you think you could put a part number in a book so I can reorder one? my machine jammed and this one has a huge bur on it that cannot be worked out :-(