Download  Print this page

Needle Position - Stitch Placement; Locking The Screen - Brother Quattro 2 6700D Operation Manual

Embroidery and sewing machine.
Hide thumbs


Table of Contents
Needle Position – Stitch
When the "Needle Position – Stitch Placement" is
on, the needle will be partially lowered for precise
stitch placement and then press the "Needle
Position" button to lower the needle completely.
Each press of the "Needle Position" button
changes the needle to the next position. When the
"Needle Position – Stitch Placement" is turned off,
each press of the "Needle Position" button simply
raises and then lowers the needle.
a Pointing needle mode is ON
b Pointing needle mode is OFF
When the needle is nearly lowered by pressing the
"Needle Position" button, the feed dogs are
lowered. At this time, the fabric can be shifted to
finely adjust the needle drop position.
Set "Needle Position – Stitch Placement" to
"ON" or "OFF".
to return to the original screen.

Locking the Screen

If the screen is locked before starting to sew, the
various settings such as the stitch width and stitch
length are locked and cannot be changed. This
prevents screen settings from accidentally being
changed or the machine from being stopped while
large pieces of fabric or projects are being sewn.
The screen can be locked when sewing utility
stitches and character decorative stitches.
Select a stitch pattern.
If necessary, adjust any settings such as the
stitch width and stitch length.
to lock the screen settings.
→ The key appears as
Sew your project.
When you are finished sewing, press
again to unlock the screen settings.
• If the screen is locked (
screen by pressing
locked, no other key can be operated.
• The settings are unlocked when the machine is
turned off and on.
), unlock the
. While the screen is


Table of Contents


   Related Manuals for Brother Quattro 2 6700D

This manual is also suitable for:


Comments to this Manuals

Symbols: 0
Latest comments:
  • handyman0031 Jan 03, 2015 10:26:
    please provide a part number for the zigzag embroidery plate,it's included with the 6700 D, however no part number is referenced anywhere in the stupid manual, and there is no item anywhere to replace it? After spending 10 K you think you could put a part number in a book so I can reorder one? my machine jammed and this one has a huge bur on it that cannot be worked out :-(