Download  Print this page

Sewing Split Embroidery Patterns - Brother Quattro 2 6700D Operation Manual

Embroidery and sewing machine.
Hide thumbs


Sewing Split Embroidery Patterns

Split embroidery patterns created with PE-DESIGN
Ver.7 or later can be sewn. With split embroidery
patterns, embroidery designs larger than the
embroidery hoop are divided into multiple
sections, which combine to create a single pattern
after each section is sewn.
For details on creating split embroidery patterns
and for more detailed sewing instructions, refer to
the operation manual included with PE-DESIGN
Ver.7 or later.
The following procedure describes how to read
the split embroidery pattern shown below from
USB media and embroider it.
Connect to the machine the media
containing the created split embroidery
pattern, and then select the split
embroidery pattern to be embroidered.
For details on recalling patterns, refer to "Selecting
Patterns from Embroidery Cards" on page 197,
"Recalling from USB Media" on page 255, or
"Recalling from the Computer" on page 256.
→ A screen appears so that a section of the split
embroidery pattern can be selected.
Select section
Select the sections in alphabetical order.
A maximum of 12 sections can be displayed in one
page. If there are 13 or more sections in the pattern,
to be embroidered.
to display the previous or next


Table of Contents


   Related Manuals for Brother Quattro 2 6700D

This manual is also suitable for:


Comments to this Manuals

Symbols: 0
Latest comments:
  • handyman0031 Jan 03, 2015 10:26:
    please provide a part number for the zigzag embroidery plate,it's included with the 6700 D, however no part number is referenced anywhere in the stupid manual, and there is no item anywhere to replace it? After spending 10 K you think you could put a part number in a book so I can reorder one? my machine jammed and this one has a huge bur on it that cannot be worked out :-(