Download  Print this page

Setting The Stitch Length; Setting The Thread Tension; Proper Thread Tension - Brother Quattro 2 6700D Operation Manual

Embroidery and sewing machine.
Hide thumbs

Advertisement

Table of Contents

Setting the Stitch Length

Follow the steps below when you want to change
the stitch pattern length.
Example:
Press
to shorten the stitch length.
→ The value in the display gets smaller.
Press
to lengthen the stitch length.
→ The value in the display gets bigger.
Memo
• Press
to check changes made to the
stitch.
• Press
to return the stitch length to
the original setting.
CAUTION
• If the stitches get bunched together, lengthen
the stitch length and continue sewing. Do not
continue sewing without lengthening the stitch
length. Otherwise, the needle may break and
cause injury.

Setting the Thread Tension

You may need to change the thread tension,
depending on the fabric and thread being used.
Follow the steps below to make any necessary
changes.

■ Proper Thread Tension

The upper thread and the bobbin thread should
cross near the center of the fabric. Only the upper
thread should be visible from the right side of the
fabric, and only the bobbin thread should be visible
from the wrong side of the fabric.
a Wrong side
b Surface
c Upper thread
d Bobbin thread
STITCH SETTINGS
2
79

Advertisement

Table of Contents

Troubleshooting

   Related Manuals for Brother Quattro 2 6700D

This manual is also suitable for:

Nv6700d

Comments to this Manuals

Symbols: 0
Latest comments:
  • handyman0031 Jan 03, 2015 10:26:
    please provide a part number for the zigzag embroidery plate,it's included with the 6700 D, however no part number is referenced anywhere in the stupid manual, and there is no item anywhere to replace it? After spending 10 K you think you could put a part number in a book so I can reorder one? my machine jammed and this one has a huge bur on it that cannot be worked out :-(