Download  Print this page

Brother Quattro 2 6700D Operation Manual Page 97

Embroidery and sewing machine.
Hide thumbs

Advertisement

Table of Contents
a
Select a stitch.
b
Attach presser foot "J".
*
Attach presser foot "N" when you select
c
Hold the thread tail and fabric with your
left hand, and rotate the handwheel with
your right hand to insert the needle into the
fabric.
a Sewing start position
d
Lower the presser foot, and hold the
"Reverse/Reinforcement Stitch" button to
sew 3-4 stitches.
→ The machine sews reverse stitches (or reinforcement
stitches).
e
Press the "Start/Stop" button to sew
forward.
a Reverse stitches
→ The machine will begin sewing slowly.
• Be sure the needle does not strike a basting
pin, or any other objects, during sewing. The
thread could tangle or the needle could break,
causing injury.
.
f
When sewing is completed, hold the
"Reverse/Reinforcement Stitch" button to
sew 3-4 reverse stitches (or reinforcement
stitches) at the end of the seam.
g
After sewing, press the "Thread Cutter"
button to trim the threads.
Memo
• When the automatic thread cutting and auto-
matic reinforcement stitch keys on the
screen are selected, reverse stitches (or
reinforcement stitches) will be sewn auto-
matically at the beginning of sewing when
the "Start/Stop" button is pressed. Press the
"Reverse/Reinforcement Stitch" button to
sew reverse stitches (or reinforcement
stitches) and trim the thread automatically at
the end of sewing.
SEWING THE STITCHES
CAUTION
3
95

Advertisement

Table of Contents

Troubleshooting

   Related Manuals for Brother Quattro 2 6700D

This manual is also suitable for:

Nv6700d

Comments to this Manuals

Symbols: 0
Latest comments:
  • handyman0031 Jan 03, 2015 10:26:
    please provide a part number for the zigzag embroidery plate,it's included with the 6700 D, however no part number is referenced anywhere in the stupid manual, and there is no item anywhere to replace it? After spending 10 K you think you could put a part number in a book so I can reorder one? my machine jammed and this one has a huge bur on it that cannot be worked out :-(