Download  Print this page

Sewing Reinforcement Stitches; Sewing Curves - Brother Quattro 2 6700D Operation Manual

Embroidery and sewing machine.
Hide thumbs


Pull the retractable cord out from the foot
controller to the desired length, and then
insert the foot controller plug into its jack
on the machine.
a Foot controller
b Foot controller jack
• Do not pull the retractable cord out beyond
the red mark on the cord.
Slowly depress the foot controller to start
• The speed that is set using the sewing
speed controller is the foot controller's maxi-
mum sewing speed.
Release the foot controller to stop the

Sewing Reinforcement Stitches

Reverse/reinforcement stitches are generally
necessary at the beginning and end of sewing. You
can use the "Reverse/Reinforcement Stitch" button
to sew reverse/reinforcement stitches manually
(see page 15).
If the automatic reinforcement stitch is selected on
the screen, reverse stitches (or reinforcement
stitches) will be sewn automatically at the
beginning of sewing when the "Start/Stop" button
is pressed. Press the "Reverse/Reinforcement
Stitch" button to sew reverse stitches (or
reinforcement stitches) automatically at the end of
sewing (see page 81).
a Reverse stitch
b Reinforcement stitch
If the stitch which you select has a double mark
" " at the top of the key display, you can sew
reverse stitches by holding the "Reverse/
Reinforcement Stitch" button.
If the stitch which you select has a dot mark " " at
the top of the key display, you can sew
reinforcement stitches by holding the "Reverse/
Reinforcement Stitch" button.

Sewing Curves

Sew slowly while keeping the seam parallel with
the fabric edge as you guide the fabric around the


Table of Contents


   Related Manuals for Brother Quattro 2 6700D

This manual is also suitable for:


Comments to this Manuals

Symbols: 0
Latest comments:
  • handyman0031 Jan 03, 2015 10:26:
    please provide a part number for the zigzag embroidery plate,it's included with the 6700 D, however no part number is referenced anywhere in the stupid manual, and there is no item anywhere to replace it? After spending 10 K you think you could put a part number in a book so I can reorder one? my machine jammed and this one has a huge bur on it that cannot be worked out :-(