Creating A Horizontal Mirror Image; Sewing A Pattern Continuously; Changing Thread Density (For Satin Stitch Patterns Only) - Brother Quattro 2 6700D Operation Manual

Creating a Horizontal Mirror
Image
To create a horizontal mirror image, select a stitch
pattern then press .

Sewing a Pattern Continuously

Press to select continuous sewing or single
stitch sewing.
Memo
• To finish a complete motif while sewing the
pattern continuously, you can press the
key while sewing. The machine will
automatically stop when the motif is finished.
EDITING STITCH PATTERNS
Changing Thread Density
(for Satin Stitch Patterns Only)
After selecting a satin stitch pattern, press
select your preferred thread density.
CAUTION
• If the stitches bunch when thread density is
changed to , return the thread density to
. If you continue sewing when the stitches
are bunched, the needle may bend or break.
Memo
• Even if you select a new pattern after chang-
ing the thread density, the thread density
remains the same until you change it.
• You cannot change thread density for a
combined pattern after additional patterns
are added.
to
4
167