Download  Print this page

Using A Frame Pattern For The Outline - Brother Quattro 2 6700D Operation Manual

Embroidery and sewing machine.
Hide thumbs

Advertisement

Table of Contents
VARIOUS EMBROIDERING FUNCTIONS
n
With the machine threaded using the thread
for the outline from step
(APPLIQUE).
a Outline of appliqué piece
Memo
• The outline is sewn using satin stitching.
• Some glue may get onto the presser foot,
needle, and needle plate at this time. Finish
embroidering the appliqué pattern, and then
clean off the glue.
o
After embroidering is finished, remove the
stabilizer material from the embroidery
frame.
p
Use scissors to cut the excess water-soluble
stabilizer from outside the appliqué outline.
q
Soak the appliqué piece in water to dissolve
the water-soluble stabilizer.
r
Dry the appliqué piece, and then iron it if
necessary.
Note
• Do not apply a strong force when ironing,
otherwise the stitching may be damaged.
304
■ Using a Frame Pattern for the Out-
l
, sew the outline
a
b
line
Using a frame pattern, the desired shape can be
added as the outline of the appliqué.
Perform the operations described in steps
a
d
through
of "Creating an Appliqué
Piece" on page 300.
Select the desired frame shape and pattern,
and add it to the appliqué pattern.

Advertisement

Table of Contents

Troubleshooting

   Related Manuals for Brother Quattro 2 6700D

This manual is also suitable for:

Nv6700d

Comments to this Manuals

Symbols: 0
Latest comments:
  • handyman0031 Jan 03, 2015 10:26:
    please provide a part number for the zigzag embroidery plate,it's included with the 6700 D, however no part number is referenced anywhere in the stupid manual, and there is no item anywhere to replace it? After spending 10 K you think you could put a part number in a book so I can reorder one? my machine jammed and this one has a huge bur on it that cannot be worked out :-(