Download  Print this page

Removing The Embroidery Unit - Brother Quattro 2 6700D Operation Manual

Embroidery and sewing machine.
Hide thumbs

Advertisement

c
Turn the main power to ON.
→ The following message will appear.
d
Press
.
→ The carriage will move to the initialization position.

■ Removing the Embroidery Unit

a
Press either
.
→ The carriage will move to the removal position.
CAUTION
• Always remove the embroidery frame before
pressing
. Otherwise, the frame may
strike the embroidery foot, and possibly cause
injury.
• The embroidery unit will not fit in the storage
case if this step is not done.
b
Turn the main power to OFF.
Note
• Be sure to turn off the machine before
removing the embroidery unit, otherwise
damage to the machine may result.
or
, then press
c
Hold down the release button, and pull the
embroidery unit away from the machine.
a Release button
CAUTION
• Do not carry the embroidery unit by holding
the release button compartment.
BEFORE EMBROIDERING
5
189

Advertisement

Table of Contents

Troubleshooting

   Related Manuals for Brother Quattro 2 6700D

This manual is also suitable for:

Nv6700d

Comments to this Manuals

Symbols: 0
Latest comments:
  • handyman0031 Jan 03, 2015 10:26:
    please provide a part number for the zigzag embroidery plate,it's included with the 6700 D, however no part number is referenced anywhere in the stupid manual, and there is no item anywhere to replace it? After spending 10 K you think you could put a part number in a book so I can reorder one? my machine jammed and this one has a huge bur on it that cannot be worked out :-(