NAMES OF MACHINE PARTS AND THEIR FUNCTIONS
Firmly insert the two spool pins into the two
holes in the spool support.
Open the upper cover of the machine. From
the back of the machine, press in the upper
cover latches (one on each side), and then
pull the upper cover up to remove it from
Insert the spool stand onto the notches of
■ How to remove
From the back of the machine, press in the
spool stand latches (one on each side), and
then pull the spool stand up to remove it
from the machine.
Attach the upper cover to the machine.
• See page 52 about the bobbin winding using
the spool stand.
• See page 63 about the upper threading
using the spool stand.