PRINT AND STITCH (COMBINING EMBROIDERY PATTERNS AND PRINTED DESIGNS)
Outputting the Background
Image and Positioning Image
Use USB media or the computer to output the
following three images from the machine.
File name may differ depending on the PDF file
• [xxx]r.pdf (Example: E_1r.pdf)
An image flipped on a vertical axis (for an iron-
• [xxx]n.pdf (Example: E_1n.pdf)
An image that is not flipped (for printing on
• [xxx]p.pdf (Example: E_1p.pdf)
An image that is not flipped, but has positioning
marks attached (for positioning)
• Print the background and embroidery
position sheet in their original dimensions. If
an image is printed in a different size, the
sizes of the embroidery pattern and
background may not match. In addition, the
built-in camera cannot detect the
embroidery position mark. Make sure that
the print settings are correctly specified.
• When printing the PDF file of the image with
positioning marks, specify the highest image
quality possible for full-color printing. In
addition, use matte printing paper. Due to
poor printing conditions, the machine's built-
in camera may not be able to correctly
detect the positioning marks. (For details on
printing, refer to the operating instructions
for your printer.)
■ Using USB Media
Insert the USB media into the primary (top)
USB port on the machine.
Select the pattern, and then press
→ The select USB output screen appears.
to select the primary (top) USB
port where the USB media is inserted.
→ Two files of the background image only and one file
for aligning embroidery into position are copied
(PDF format) onto the USB media.
• Do not remove the USB media from the
machine until data output is finished.
Remove the USB media where the image
data is saved from the machine, and then
copy the image data from the USB media to