Download  Print this page

Brother Quattro 2 6700D Operation Manual Page 119

Embroidery and sewing machine.
Hide thumbs

Advertisement

c
Press
to set the machine to free motion
sewing mode.
→ The key appears as
to the necessary height, and then the feed dogs are
lowered for free motion sewing.
a
a Free motion quilting foot "C"
→ When stitch Q-01 or 1-31 is selected, free motion
quilting foot "C" is indicated in the upper-left corner
of the screen.
, the quilting foot is raised
d
Remove the presser foot holder (see page
66).
e
Attach free motion quilting foot "C" at the
front with the presser foot holder screw
aligned with the notch in the quilting foot.
a Presser foot holder screw
b Notch
Note
• Make sure that the quilting foot is attached
properly and not slanted.
f
Hold the quilting foot in place with your
right hand, and tighten the presser foot
holder screw using the screwdriver with
your left hand.
a Presser foot holder screw
CAUTION
• Be sure to securely tighten the screws with the
included screwdriver. Otherwise, the needle
may touch the quilting foot, causing it to bend
or break.
g
Use both hands to stretch the fabric taut,
and then move the fabric at a consistent
pace in order to sew uniform stitches
roughly 2.0-2.5 mm (approx. 1/16 - 3/32
inch) in length.
a Stitch
SEWING THE STITCHES
3
117

Advertisement

Table of Contents

Troubleshooting

   Related Manuals for Brother Quattro 2 6700D

This manual is also suitable for:

Nv6700d

Comments to this Manuals

Symbols: 0
Latest comments:
  • handyman0031 Jan 03, 2015 10:26:
    please provide a part number for the zigzag embroidery plate,it's included with the 6700 D, however no part number is referenced anywhere in the stupid manual, and there is no item anywhere to replace it? After spending 10 K you think you could put a part number in a book so I can reorder one? my machine jammed and this one has a huge bur on it that cannot be worked out :-(