Display the Fabric While
Aligning the Embroidering
The fabric hooped in the embroidery frame can be
displayed on the LCD so that the embroidery
position can be easily aligned.
This feature allows you to easily combine patterns
while checking the final image.
See "Display the Fabric While Aligning the
Embroidering Position" on page 211.
Change the Pattern Size While
Maintaining the Desired Thread
Density (Stitch Recalculator)
In the embroidery edit screen, the size of the
pattern can be changed while the desired thread
density is maintained.
With this function, the pattern will be enlarged or
reduced at a larger ratio than with normal pattern
See "Changing the Pattern Size While Maintaining
the Desired Thread Density (Stitch Recalculator)"
on page 270.
Expand Your Creativity With
Example with decorative stitches
You can create bobbin work, which gives a three-
dimensional appearance to the surface of the
fabric, by winding the bobbin with heavy weight
thread or ribbon too thick to be fed through the
sewing machine needle and sewing on the wrong
side of the fabric.
Bobbin work is sewn using the special bobbin case
(gray) included with this machine.
See "How to Create Bobbin Work" on page 307.