Checking the Needle Location in
to use the built-in camera to view
the sewing area in the LCD screen. View the
location of the needle from 2 different angles and
the needle drop position, even if the needle has
not actually been lowered.
→ The camera view window appears.
a CAMERA IMAGE
b GRID VIEW
d VIEW ANGLE
e NEEDLE DROP POSITION
Press this key to save a camera image to the USB
Insert the USB media to the machine to save a
camera image (Refer to "Saving a Settings Screen
Image to USB Media" on page 39). The files for
camera images are saved with the name "C**.BMP".
A maximum of 100 camera images can be saved in
one USB media.
"**" in the name "C**.BMP" will automatically be
replaced with a number between 00 and 99.
Press this key to display a grid.
Press this key to close the screen.
Each press of
between a front view and an angled top view.
NEEDLE DROP POSITION
the screen as "
Lower the presser foot before pressing
Once the needle drop position appears on the
screen, you can raise the presser foot and change
the needle drop position by moving the fabric.
a Needle drop position
• The camera view window disappears when
you start sewing.
• When sewing thick fabrics, the needle drop
position indicated in the screen may differ
from the actual position.
switches the built-in camera
to show the needle drop position in
to enlarge the image in the screen.
again to return the image to its original