Download  Print this page

Zipper Insertion; Centered Zipper - Brother Quattro 2 6700D Operation Manual

Embroidery and sewing machine.
Hide thumbs

Advertisement

Table of Contents
SEWING THE STITCHES

Zipper Insertion

■ Centered Zipper

Use for bags and other such applications.
a
Select
.
Memo
• For details on each stitch, refer to the
"STITCH SETTING CHART" at the end of
this manual.
Note
• Make sure you sew using the middle needle
position.
b
Attach presser foot "J" and sew straight
stitches up to the zipper opening. Change to
a basting stitch (see page 98) and sew to the
top of the fabric.
a Basting stitches
b Reverse stitches
c End of zipper opening
d Wrong side
c
Press the seam allowance open and attach
the zipper with a basting stitch in the
middle of each side of the zipper tape.
a Basting stitches
b Zipper
c Wrong side
146
d
Remove presser foot "J". Align the right
side of the pin in zipper foot "I" with the
presser foot holder, and attach the zipper
foot.
a Right
b Left
c Needle drop position
CAUTION
• When using zipper foot "I", make sure the
straight stitch, middle needle position is
selected. Rotate the handwheel toward you
(counterclockwise) to make sure the needle
does not strike the presser foot. If another
stitch is selected, the needle will strike the
presser foot, causing the needle to break and
possibly causing injury.
e
Topstitch 7 to 10 mm (approx. 1/4 to
3/8 inch) from the seamed edge of the
fabric, then remove the basting.
CAUTION
• Make sure the needle does not strike the
zipper during sewing. If the needle strikes the
zipper, the needle may break, leading to
injury.

Advertisement

Table of Contents

Troubleshooting

   Related Manuals for Brother Quattro 2 6700D

This manual is also suitable for:

Nv6700d

Comments to this Manuals

Symbols: 0
Latest comments:
  • handyman0031 Jan 03, 2015 10:26:
    please provide a part number for the zigzag embroidery plate,it's included with the 6700 D, however no part number is referenced anywhere in the stupid manual, and there is no item anywhere to replace it? After spending 10 K you think you could put a part number in a book so I can reorder one? my machine jammed and this one has a huge bur on it that cannot be worked out :-(