Download  Print this page

Brother Quattro 2 6700D Operation Manual Page 351

Embroidery and sewing machine.
Hide thumbs

Advertisement

This message appears when
there are not enough colors in
the custom thread table, to
display the color scheme you
have selected to display.
In this case, set more colors
in the custom thread table
(See page 278), or select
less colors in the color
shuffling function. (See
page 283.)
This message appears when
there are not enough colors in
the thread table, to display
the color scheme effect you
have selected.
In this case, select another
effect or the custom thread
table (300 color palette) or
less colors in the Color
Shuffling function. (See
page 283.)
If there are not enough
number of colors set in the
custom thread table, set more
colors in the table. (See
page 278.)
This message appears when
100 image files have already
been saved on the USB
media.
In this case, delete a file from
the USB media or use
different USB media. (See
page 39 and 87)
This message is displayed
when the automatic needle
threading button is pushed
while twin needle sewing is
set.
This message is displayed
when the "Start/Stop" button
is pressed before the edge of
the fabric is detected. To
detect the edge of the fabric
using the built-in camera,
press
, raise the
presser foot, and then
perform the operation again.
(see page 148)
ERROR MESSAGES
This message is displayed
when the built-in camera
cannot detect the edge of the
fabric.
If this message appeared
after sewing has reached 1 to
2 cm (about 3/8 to 3/4 inch)
from the edge of the fabric,
m
refer to step
in "Edge
Sewing" on page 154.
If this message appeared
during edge sewing, the edge
of the fabric cannot be
detected by the built-in
camera. Press
, raise
the presser foot, raise the
needle if it is lowered, and
then perform the procedure
described in "Edge Sewing"
on page 150 starting from
f
step
.
If this error message appears
again, sew without using
edge sewing function.
This message appears when
you try to save more than 100
camera image or settings
screen image files in the USB
media. In this case, delete a
file from the USB media or
use different USB media.
(See page 39 and 211)
This message appears when
or
is
pressed to delete the settings
for a utility stitch. To delete
the selected settings, press
.
This message is displayed
when an unusable
embroidery card is inserted.
349
9

Advertisement

Table of Contents

Troubleshooting

   Related Manuals for Brother Quattro 2 6700D

This manual is also suitable for:

Nv6700d

Comments to this Manuals

Symbols: 0
Latest comments:
  • handyman0031 Jan 03, 2015 10:26:
    please provide a part number for the zigzag embroidery plate,it's included with the 6700 D, however no part number is referenced anywhere in the stupid manual, and there is no item anywhere to replace it? After spending 10 K you think you could put a part number in a book so I can reorder one? my machine jammed and this one has a huge bur on it that cannot be worked out :-(