Download  Print this page

Brother Quattro 2 6700D Operation Manual Page 167

Embroidery and sewing machine.
Hide thumbs

Advertisement

Table of Contents
No.
Display
Key Name
a
Pattern display size
b
Pivot key
c
Free motion mode key Press this key to enter free motion sewing mode.
d
Automatic
reinforcement stitch
key
e
Automatic thread
cutting key
f
Delete key
g
Stitch width and stitch
length key
h
Thread tension key
i
Memory key
j
Elongation key
k
Needle mode
selection key
(Single/Double)
l
Size selection key
m
Vertical mirror image
key
n
Horizontal mirror
image key
o
Single/Repeat sewing
key
p
Back to beginning key When sewing is stopped, press this key to return to the beginning of the
q
Image key
r
Home key
s
Screen lock key
t
Thread density key
u
Character spacing key Press this key to change the spacing of character patterns.
Show the approximate size of the pattern selected.
: Nearly the same size as the sewn pattern
: 1/2 the size of the sewn pattern
: 1/4 the size of the sewn pattern
*
The actual size of the sewn pattern may differ depending on the type of
fabric and thread that is used.
Press this key to select the pivot setting. When the pivot setting is selected,
stopping the machine lowers the needle and slightly raises the presser foot
automatically. In addition, when sewing is restarted, the presser foot is
automatically lowered.
• If this key appears as
, the pivot function cannot be used.
• Be sure the needle position on page 3 of Machine Settings is set to the down
position.
The feed dog is lowered and presser foot is raised to a height appropriate for
free motion quilting.
Press this key to turn on the automatic reinforcement stitching mode.
Press this key to turn on the automatic thread cutting mode.
When you make a mistake selecting a stitch pattern, use this key to delete the
mistake. When you make a mistake in combining stitch patterns, use this key
to delete stitch patterns.
Shows the stitch width and stitch length of the selected stitch pattern. The
machine default settings are highlighted.
Shows the thread tension setting for the selected stitch pattern. The machine
default settings are highlighted
Use this key to save stitch pattern combinations.
When 7mm satin stitch patterns are selected, press this key to choose from 5
automatic length settings, without changing the stitch zigzag width or stitch
length settings.
Press this key to choose single needle sewing or twin needle sewing.
Use this key to select the size of the stitch pattern (large, small).
After selecting the stitch pattern, use this key to create a vertical mirror image
of the stitch pattern.
After selecting the stitch pattern, use this key to create a horizontal mirror
image of the stitch pattern.
Press this key to choose single stitches or continuous stitches.
pattern.
Press this key to display an enlarged image of the selected stitch pattern.
Press this key to return to the home page screen.
Press this key to lock the screen. When the screen is locked, the various
settings, such as the stitch width and stitch length, are locked and cannot be
changed. Press this key again to unlock the settings.
After selecting the stitch pattern, use this key to change the thread density of
the pattern.
EDITING STITCH PATTERNS
Explanation
Page
91
84
116
81
4
82
158, 159
78-79
79
177-178
166
60
166
166
167
167
168
168
28
86
167
160
165

Advertisement

Table of Contents

Troubleshooting

   Related Manuals for Brother Quattro 2 6700D

This manual is also suitable for:

Nv6700d

Comments to this Manuals

Symbols: 0
Latest comments:
  • handyman0031 Jan 03, 2015 10:26:
    please provide a part number for the zigzag embroidery plate,it's included with the 6700 D, however no part number is referenced anywhere in the stupid manual, and there is no item anywhere to replace it? After spending 10 K you think you could put a part number in a book so I can reorder one? my machine jammed and this one has a huge bur on it that cannot be worked out :-(