Download  Print this page

Brother Quattro 2 6700D Operation Manual Page 353

Embroidery and sewing machine.
Hide thumbs

Advertisement

Table of Contents
This message is displayed
when the machine is in
embroidery edit mode, and
you try to use an editing
function when the pattern is
not completely within the red
outline.
This message is displayed
when you try to save a
copyright protected pattern to
USB media/Computer.
According to copyright laws,
patterns that are illegal to
reproduce or edit cannot be
saved to USB media or
computer. If this message
displays, save the pattern in
the machine's memory.
This message is displayed
when the machine is in
embroidery mode and the
small frame is attached, and
the selected pattern does not
fit in the small frame.
This message appears when
embroidery frame (small) is
attached while aligning the
embroidery position using the
built-in camera.
This message is displayed
when
is pressed
when changing thread colors.
This message appears if the
machine is turned off while
sewing, then turned on again.
Press
to return the
machine to the condition
(pattern position and number
of stitches) when it was
turned off. Follow the
procedure described in "If the
Thread Breaks During
Sewing" on page 230 to align
the needle position and sew
the remainder of the pattern.
ERROR MESSAGES
This message is displayed
when the "Start/Stop" button
is pushed and the machine is
in embroidery mode, but the
embroidery unit is not
attached.
This message is displayed
when replacing the
embroidering bobbin thread.
This message is displayed
when rotating a saved
combined pattern in the
Embroidery screen.
This message is displayed
when the embroidery frame is
attached.
351
9

Advertisement

Table of Contents

Troubleshooting

   Related Manuals for Brother Quattro 2 6700D

This manual is also suitable for:

Nv6700d

Comments to this Manuals

Symbols: 0
Latest comments:
  • handyman0031 Jan 03, 2015 10:26:
    please provide a part number for the zigzag embroidery plate,it's included with the 6700 D, however no part number is referenced anywhere in the stupid manual, and there is no item anywhere to replace it? After spending 10 K you think you could put a part number in a book so I can reorder one? my machine jammed and this one has a huge bur on it that cannot be worked out :-(