Table of Contents
Advertisement
MY DESIGN CENTER WITH SCAN
Scanning to Trace Background
Image
If you have a favorite picture or drawing, it can
easily be traced on the scanned background image
and you can create your own pattern.
a
Press
The image display screen appears.
b
Using the magnets, affix a picture to the
scanning frame and attach the frame to the
machine. Refer to "Using the Scanning
Frame" on page 18.
c
Press
.
Note
• When scanning starts, some of the machine
lights will turn off in certain circumstances,
in order to increase the scan quality. The
machine lights will return to their original
brightness when scanning ends.
• You can import an image of 2 MB or smaller
from USB media, computer or SD card.
19
.
When the following message appears, press
Scanning begins.
*
To stop scanning and return to the screen in
c
step
, press
When the following message appears, remove the
scanning frame, install the needle plate cover, and
then re-install the scanning frame, and then press
.
d
When scanning is finished, scanned image is
displayed transparently in the pattern
drawing area.
.
.
Advertisement
Table of Contents
