Download  Print this page

Displaying A Background Image - Brother 882-W80 Operation Manual

Hide thumbs

Advertisement

CONFIRMING THE PATTERN POSITION

Displaying a Background Image

Using a special application downloaded to a
smartphone or tablet, you can transfer a photo of the
hooped fabric to be embroidered to the machine to be
used as a background image.
The embroidery frame is displayed in the application.
You can see how the pattern will be arranged on the
actual fabric.
Note
• The wireless network settings must first be
specified on the machine. Refer to "WIRELESS
NETWORK CONNECTION FUNCTIONS" on
page 20.
• Embroidery frames with factory-coded stickers can
be used with the application (My Design Snap).
1
■ Displaying the Background Image on the
Screen of the Machine
a
Select the pattern. (page 36)
b
Photograph the fabric in the frame with the easy mode
of the application, and then transfer it to the machine.
For a detailed procedure, refer to the application.
c
Press
.
*
Attach the frame used in the image before pressing
.
 The transferred background image appears on the
screen of the machine.
Memo
• To hide the background image, press
Press
again.
• The transferred background image includes the
embroidery frame display.
60
1 Factory-
coded
stickers
to display the background image
■ Calibrating the Position of the Background
Image
By calibrating the position of the background image
transferred to the machine, the pattern can be positioned
more accurately.
a
Select a pattern. (page 36)
b
Set the application to advanced mode, attach the
embroidery positioning sticker to the fabric in the
hoop, take the photo of the background, and with the
advanced mode of the application, transfer it to the
machine.
For a detailed procedure, refer to the application.
c
Press
.
*
Attach the frame used in the image before pressing
.
 The carriage will move, and the LED pointer will turn
on.
d
Use
of the larger circle in the embroidery positioning
sticker.
1 Center of the larger circle in the embroidery positioning
sticker
Memo
• The position can also be calibrated by lowering the
needle with the handwheel. This method enables
more accurate positioning. Slowly turn the
handwheel toward you (counterclockwise) to check
.
the needle drop point. Then, turn the handwheel
away from you (clockwise) until the mark on the
handwheel is at the top. The carriage cannot move
if the mark on the handwheel is not at the top.
a
e
Press
.
 The position of the background image is calibrated.
to align the LED pointer with the center
1 Mark
1

Advertisement

Table of Contents

   Related Manuals for Brother 882-W80

This manual is also suitable for:

882-w82

Comments to this Manuals

Symbols: 0
Latest comments: