Removing The Modem - Intel LP300 Service Manual

Removing the Modem

1. Follow the sequence of steps 1 to 9 as illustrated in " Removing the System Memory " on page 2 - 14 .
2. Remove screws " 1 " and " 2 " from the modem module " 3 ", then disconnect the modem cable " 4 ".
3. Disconnect the modem module from the connector socket " 5 ", and lift it and the cable off the board.
a.
1
3
2
4
b.
a.
5
b.
Removing the Modem 2 - 19
Disassembly
Figure 2 - 9
Modem Removal
Sequence
a. Remove the
screws from the
modem unit, and
disconnect the
cable.
b. Lift the modem
and cable off the
board.
3.Modem module
4.Modem cable
• 2 Screws